Products Archive - Page 3 of 4 - Resonac Asia Pacific

product

SHOROX™ Overview

SHOROX™ is CeO₂ abrasive for glass polishing. This high quality SHOROX is developed by the long history of Tohoku Metal Chemical Co., Ltd. and the production, assessment, and management technologies of Resonac Corporation (Tohoku Metal Chemical Co., Ltd., a member of our group, industrially produced the first CeO2 abrasive in Japan.)

Applications

SHOROX™ has various range of product kinds to apply for:

Glass substrates
Optical glasses
Hard disk glass plates
Quartz
Photomasks, and others.

Hence our end users are mainly hard disk, glass disks, camera lenses manufacturers.

Specification

We do have wide range of grades to conform with your application.
Please kindly contact us for further details, so we can recommend you the best suit for your request. Or please feel free to check the main grades and application data here.

Download PDF – SHOROX™ Catalog

HomeProducts

product

LED Chip Overview

Visible Chips from Resonac (formerly Showa Denko) come in a wide range of specifications such as, Gallium Phosphide LED chips, Gallium Arsenic phosphide LED chips, Aluminum Gallium Arsenide LED chips, and Aluminum Indium Gallium Phosphide LED chips. We have various luminance levels and colors, such as red, green, yellow-green, yellow, and orange. They are used in various applications such as displays, automobile tail lamps, back lights, plant cultivation, and lighting.

Applications

Infrared Chips, such as Gallium Arsenide LED chips and Aluminum Gallium Arsenide LED chips, make up our infrared lineup. We have various chip structures, such as Substrate removal type, Single side 2 electrode type, and reflection type.

We also have various wavelengths and outputs ranging from 660nm to 970nm. They are used in applications such as remote controls, sensors, opto couplers, opto-interrupters, and medical.

Catalog and Specification

We do have wide range of grades to conform with your application.
Please contact us for further details, so we can recommend you the best suit for your request. Or please feel free to check the main grades and application data here.

Catalogue Download

Download PDF – LED Chip 2022 Catalogue
Download PDF – Infrared LED chip for Optocoupler

Data Sheet – MOCVD LED

Download PDF – P85-26ATA
Download PDF – P85-26GTA
Download PDF – R66-26GSA
Download PDF – R66-35GSA
Download PDF – R69-52GSA
Download PDF – R78-26GSE
Download PDF – R78-35GSE
Download PDF – R81-35GSE
Download PDF – R85-26GSE
Download PDF – R85-35GSE
Download PDF – R85-52GSE
Download PDF – R85-110GWS
Download PDF – R87-35GSE
Download PDF – R94-35GSE
Download PDF – R94-110GWS
Download PDF – R97-35GSE

HomeProducts

product

Viscomate™ Overview

VISCOMATE™ is the water-soluble polymer and used for the pharmaceutical excipients (for external use), cosmetics materials, and industrial thickener. Particularly neutralized polyacrylate (acrylic acid / sodium acrylate copolymer) created by original technique developed by Resonac (formerly SHOWA DENKO K.K.) with unique technologies.
This particularly neutralized polyacrylate (NP grade) is mainly used as a raw material for poultice or cooling sheet. NP-grade is already registered to US-DMF and got the Chinese Import Drug License (IDL).

We limit the administration route only for general external and membrane as the application of medical use. (Not sold for food additives and feed additives.)

Product Grades

Grade	Viscosity*1 (reference value)	pH*2	Loss on Drying	Packaging Unit (kg)	Characteristics
NP-800	450-600	5.5-6.1	≦5%	20	This grade has the lowest pH, and is used to increase adhesion.
NP-700	500 – 650	6.2 – 6.8	≦5%	20	This is the general-purpose grade. We have many data of this grade.
NP-600	500 – 650	7.0 – 7.4	≦5%	20	This grade is used when actives that are stable in alkali regions need to be mixed.

*1: Measurements with a model B viscometer, 0.2% aq. solution, 30 rpm, 20 C
*2: 0.2% aq. solution

Comparison of VISCOMATE™ Grade

Formulation Reference

Pour glycerin into a 200mL beaker, add aluminum hydroxide gel, and stir with a spatula until homogenous. Next, add VISCOMATE™ and stir until homogenous. To that, add 5 mL of a pre-prepared aqueous solution of tartaric acid, and thicken with a spatula. Continue to stir for a while after all of the aqueous solution of tartaric acid has been added, then transfer the sol to a designated container. As an example, with the mixture in table 1, it is known that when mixing the materials according to the procedure described above, grades of VISCOMATE™ with greater acrylic acid content will quickly start cross-linking and solidify.

Application

For: Cooling patch, Eye gel patch, Face mask patch, and so on

After dispersing VISCOMATE™ onto a moistening agent such as glycerin, adding water and kneading together with the cross-linking agents of aluminium compounds and organic acids, and aqueous gel raw material sol is formed.

The role of VISCOMATE™ in this aqueous gel are:
1. Gives gels adhesion property
2. Gives the ability to main shape
3. Retains water/solvent inside the gel

** Unlike gels formed by agar or carrageenan, VISCOMATE™ gels have viscidity, are not easily torn when stretched apart, and have elastic resilience.

Information

Registration status:

US DMF registration number: 22803 (Type IV)
European REACH regulations: Registration obtained

CAS No. : 9033-79-8
Packaging Unit: 20 kg
Free Samples Unit: 100g

Handling Viscomate:

When handling this product, be sure to read SDS
Applicability of this product to particular purposes is left up to the judgment of the customer
This product’s indications for pharmaceutical purposes are limited to general external and transcutaneous applications. It is not indicated for use in preparations for dermal injury.
The numbers associated with this product’s contents, physical and chemical properties, etc., are not guaranteed.

Download PDF – Product Catalog

HomeProducts

product

TPNa™ Vitamin E Derivative Overview

TPNa™ is the only water-soluble Vitamin E derivative available in the world!
Vitamin E (α-tocopherol) is one of the most important vitamins for cosmetic, and it protects skin from oxidative attack of radicals and peroxide.

TPNa™ introduced a phosphoryl group to protect its oxygen-sensitive hydroxyl group in Tocopherol. It can quickly convert to Vitamin E into your skin, also high Vitamin E concentration in the formulation, recovers the skin problems and brings the freshness and youth of the skin in a short time.

TPNa™ is registered an active ingredient for Quasi Drug in Japan for the prevention and cure of rough dry skin and Quasi Drug Additive for anti-oxidant.

TPNa™ Details

INCI Name:	Sodium dl-α-tocopheryl Phosphate
Form:	powder
CAS Reg No.:	113170-55-1

The oxygen-sensitive hydroxyl group of Tocopherol is chemically modified and protected with a phosphoryl group. Once absorbed in skin, TPNa™ is readily converted to the active tocopherol via hydrolysis catalyzed by phosphatase, a ubiquitous enzyme in skin.

Kindly select on one of the following links below for more information

Download PDF – Brochure

Download PDF – Technical Information

TPNa™ Features

Significant Increase of Skin Moisturization

Enhancement on ceramides synthesis in the skin. Increase the cuticle moisture content within a short period

Active Ingredient for Quasi Drug in Japan

Anti-inflammatory and radical-scavenging effect prevents and cures your skin from troubles that cause lipid-oxidations and inflammations i.e. acne, Erythema.

Anti-oxidation & Anti-aging Effect

Skin protection against UV irradiation from ROS (Reactive Oxygen Species). Prevent significant damage on collagens and dermis strain, which helps you to keep the freshness and youth of the skin.

TPNa™ Formulation Reference

Download PDF – Clear Lotion

Download PDF – Milk lotion

Download PDF – Eye Cream

Download PDF – Gel

We do provide details of technical data for many formulas such as collagen, anti-acne, whitening, please feel free to drop us your interest via our enquiry form.

HomeProducts

product

RIPOXY™ Overview

RIPOXY™ is a modified epoxy resin and we are the first company to produce this type of resin on a commercial scale. RIPOXY™ is a thermosetting resin, generally known as vinyl ester resin or epoxy acrylate resin. RIPOXY™ combines the excellent properties of cured epoxy resins and the workability of unsaturated polyester resins.

Product List

Bisphenol-A Epoxy Vinyl Ester Resin

RIPOXY™	Supply source	Packing (drum)	Shelf life (month/25°C)	Corrosion Resistance	Heat Resistance	Viscosity (dPa.s/25°C)	Download
R-802EX	JAPAN CHINA	200	6	Acid Alkali	100	4-6	pdf (SDS) pdf (TDS)
R-804J	JAPAN	200	12	Acid Alkali	107	2.0-3.5	pdf (SDS) pdf (TDS)
R-804JB	JAPAN	200	6	Acid Alkali	108	2.0-3.5	pdf (SDS) pdf (TDS)
R-806EX	JAPAN CHINA	200	6	Acid Alkali	110	1-2	pdf (SDS) pdf (TDS)

Novolac Epoxy Vinyl Ester Resin

RIPOXY™

Supply source

Packing
(drum)

Shelf life
(month/25°C)

Corrosion
Resistance

Heat
Resistance

Viscosity
(dPa.s/25°C)

Download

H-600EX

JAPAN

CHINA

180

3.5

Solvent

151

6-12

pdf (SDS)
pdf (TDS)

H-630EX

JAPAN

CHINA

180

3.5

Solvent

137

1.8-2.2

pdf (SDS)
pdf (TDS)

Brominated Epoxy Vinyl Ester Resin

RIPOXY™

Supply source

Packing
(drum)

Shelf life
(month/25°C)

Corrosion
Resistance

Heat
Resistance

Viscosity
(dPa.s/25°C)

Download

S-510EX

JAPAN

CHINA

180

Flame-retardant

H2SO4(high concentration)

135

3-5

pdf (SDS)
pdf (TDS)

S-520EX

JAPAN

CHINA

180

Flame-retardant

H2SO4(high concentration)

110

4-5

pdf (SDS)
pdf (TDS)

Epoxy Vinyl Ester Resin Primer

RIPOXY™

Supply source

Packing
(drum)

Shelf life
(month/25°C)

Corrosion
Resistance

Heat
Resistance

Viscosity
(dPa.s/25°C)

Download

R-806DAEX

JAPAN

CHINA

180

–

100

0.5-1.5

pdf (SDS)
pdf (TDS)

CP-819EX

JAPAN

CHINA

180

–

110

0.1-0.4

pdf (SDS)
pdf (TDS)

Epoxy Vinyl Ester Flake Compound

RIPOXY™	Supply source	Packing (drum)	Shelf life (month/25°C)	Corrosion Resistance	Heat Resistance	Viscosity (dPa.s/25°C)	Download
FC-83NS-WHITE EX	JAPAN CHINA	15kg/kan	5	Ask	107	20-27	pdf (SDS) pdf (TDS)
FC-83S-GRAY EX	JAPAN CHINA	15kg/kan	5	Ask	108	20-27	pdf (SDS) pdf (TDS)
FC-63EX	JAPAN CHINA	20kg/kan	6	Ask	151	–	pdf (SDS) pdf (TDS)

Unsaturated Polyester Resin

RIGOLAC™

Supply source

Packing
(drum)

Shelf life
(month/25°C)

Corrosion
Resistance

Heat
Resistance

Viscosity
(dPa.s/25°C)

Download

H-297

JAPAN

200

For plating

line

114

4-6

pdf (SDS)
pdf (TDS)

Application Fields

Flake lining of cured oil tanks, FRP helmet, FRP ducts, FRP bio reactor, Electrostatic precipitator, Boiler exhaust duct at thermal power station, Floor lining for semiconductor plant, Scrubber, Wind turbine blade

Distributors

Singapore

Company name	FRP SERVICES (ASIA) PTE LTD
Address	24 Raffles Place, #17-04A Clifford Centre, Singapore 048621
TEL	+65 6270 5001
Personnel	Mr. Johann, Mr. Raj, Ms.Kim
E-mail	inquiry@frpservices.com
Website	http://www.frpservices.com/asia-pacific/

Indonesia

Company name	PT Justus Kimiaraya
Address	Wisma Justus. Jln Danau Sunter Utara blok O3 No.27-28
TEL	+62 21 6515188
Personnel	Mr. Armand Martaniardjo
E-mail	sales_jkr@justus.co.id
Website	http://www.justus.co.id

Vietnam

Company name	Finebiz Co., Ltd
Address	801/89 Xo Viet Ngghe Tinh, Ward 26, Binnh Thanh Dist, HCMC
TEL	+84 974494470
Personnel	Mr. Nguyen Van Phong
E-mail	finebizvn@gmail.com

Company name	FRP SERVICES & COMPANY (VIETNAM)
Address	Room 402, 04^th floor, Vinahud Building, Trung Yen 9 road, Cau Giay District, Hanoi
TEL	+84 (24) 37282357
Mobile	+84 903236254
Personnel	Mr. Thong
E-mail	thong@frp.co.jp
Website	www.frpservices.com

Thailand

Company name	Eternal Resonac Materials
Address	19th Floor Bangkok City Tower 179/90-92, South Sathorn Rd., Tungmahamek, Sathorn, Bangkok 10120
TEL	+66(2)2872 000
Personnel	Ms Kanyakoch
E-mail	kanyakoch@eshp.co.th
Website	www.eternalresonac.com

Company name	Pongpana
Address	3,5 Soi Prayamontad Yak 9-1 Bangkhuntien Rd., Bangbon, Bangbon, Bangkok 10150
TEL	+66(2)89983618
Personnel	Mr Chanwit
E-mail	info@pongpana.com
Website	http://pongpana.com/index.php

Philippines

Company name	POLYMER PRODUCTS (PHIL.), INC
Address	11 Joe Borris Street, Bagong llog, Pasig 1603, Manila, Philippines
TEL	0921 229 7457
E-mail	info@polymerprod.com
Website	https://polymerpd.com/

Taiwan

Company name	T-Drum Industry Enterprise
Address	17F-1, NO.75, SEC.1, SHIN TAI WU ROAD, HSI-CHIH, TAIPEI HSIEN, TAIWAN, R.O.C.
TEL	+886(2)2698 2616
Personnel	Mrs. ALICE YEN
E-mail	import@t-drum.com.tw
Website	www.t-drum.com.tw

UAE

Company name	FRP SERVICES & COMPANY MIDDLE EAST
Address	P.O.Box 54376, 4WA628, Dubai Airport Free Zone, Dubai, UAE
TEL	+971(4)2045050
Personnel	Mr. Masashi Yanagida
E-mail	info@frpservices.com
Website	http://www.frpservices.com/us/

Turkiye

Company name	Omnis Kompozit Ltd.
Address	Cinardere Mh.Akseki Sk. No:2/A Pendik / Istanbul / Turkiye
TEL	+90 (216) 379 92 20
Personnel	Mr. Recai
E-mail	rturan@omniskompozit.com
Website	http://www.omniskompozit.com/home

Pakistan

Company name	FRP SERVICES & COMPANY (P.L.O)
Address	Business Arcade, 3rd Floor, Suit# 309, Shahrah-e-Faisal, Karachi Pakistan 75400
TEL	+92(21) 3432 7632
Personnel	Mr. Syed Shoaib Anwer
E-mail	sgchem@frps.com.sg
Website	http://www.frpservices.com/asia-pacific/

HomeProducts

product

SH Series Overview

SH 7000 and SH 8000 are vinyl ester resin that suitable for making quick curing type for filament winding, hand lay-up and spray up moulding. These resin products have the good anti-corrosion, chemical resistance property for tank, pipe and fitting, and so forth. Especially recommended for Chemical Engineering, due to excellent performance on strength properties. This resin is not suitable for clear transparent casting purpose.

Product List

Products

Manufacturing Site

Packing (drum)

Shelf life (month/25°C)

Corrosion Resistance

Viscosity (dPa.s/25°C)

Download

SH 7000

ASEAN

200

Acid Alkali

4-6

SDS

TDS

SH 8000

ASEAN

200

Acid Alkali

4-6

SDS

TDS

Chemical Corrosion Resistance Table

Find SH Series vinyl ester resin corrosion resistance againts various chemicals (A~Z).

NOTE
However, owing to difficulties in presenting information application to all situation, no warranty is expressed or implied and user are recommended to carry out their own tests to determine the applicability of the above information and the suitability of SH 7000 / 8000 for their particular requirements.

[1] Synthetic surfacing non-woven fabric such as polyethylene terephthalate fiber should be used in surfacing layer of corrosion resistant layer.
[2] Double top coating should be covered. The first top coating is a non wax type and the last top coating is a wax type.
[3] Curing system of BPO/amine is better.
[4] Keeping chemicals may be colored in first storage under high concentration.

A

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Acetic Acid	10	80
Aluminium chlorohydroxide	50	35
Aluminium Potassium sulfate	all	90
Aluminium sulfate	all	90
Ammonium bicarbonate	10	70
Ammonium bicarbonate	50	70
Ammonium carbonate	50	70
Ammonium chloride	all	90
Ammonium nitrate	all	85
Ammonium persulfate	all	80
Ammonium sulfate	20	90
Aluminium chloride	all	90
Amyl Alcohol	100	50
Aniline sulfate	all	90
Antimony trichloride	saturated	90
Aqueous ammonia	29	40

B

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Barium carbonate	all	90
Barium chloride	all	90
Barium hydroxibe	10	65
Barium sulfide	all	80
Barium sulfonic acid	50	60
Benzene acid	saturated	100
Boric acid	all	100
Butyric acid	25	90
Butyric acid	50	90

C

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Calcium chlorate	all	100
Calcium chloride	all	90
Calcium hydroxibe	25	100
Calcium hypochlorite	all	70
Calcium sulfate	all	90
Carbon dioxide	Gas	100
Carbon monocide	dry / wet	100
Chloroacetic acid	25	50
	50	40
	saturated	NR
Chromic acid	20	50
Citric acid	all	90
Copper chloride	all	90
Copper cyanide	all	90
Copper sulfate	all	90

D~E

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Dibutyl ether	100	35
Dibutyl water	100	80
Ethylene chlorohydrin	100	35

F~G

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Ferric chloride	all	90
Ferric nitrate	all	90
Ferric sulfate	all	90
Ferrous choride	all	90
Ferrous nitrate	all	90
Ferrous nitrate	all	90
Ferrous sulfate	all	90
Formaldehyde	37	70
Formic acid	10	50
Formic acid	98	30
Gasoline	100	50
Gulconic acid	25	80
Gulconic acid	50	60
Glycerine	100	90

H~K

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Heptane	100	90
Hydrobromine acid	25	80
Hydrobromine acid	48	65
Hydrochlorus acid	10	80
	15	80
	20	80
Hydrofluosilic acid[1]	10	70
Hydrofluosilic acid[1]	25	35
Hydrofluoric acid[1,2]	10	65
Hydrofluoric acid[1,2]	15	40
Hypochlorous acid	10	65
Hypochlorous acid	20	50
Hydrogen peroxide	30	25
JIS No.2 insulation oil	100	90
Kerosene	100	50

L~M

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Latic acid	all	90
Lead acetate	all	90
Sodium acetate	all	90
Levulinic acid	all	90
Linseed oil	100	80
Magnesium carbonate	all	80
Magnesium chloride	all	90
Magnesium sulfate[1]	all	90
Maleic acid	100	90
Mercuric chloride	100	90
Mercurous chloride	100	100

N~O

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Naphtha	100	80
Naphthalene	100	80
Nickel chloride	all	90
Nickel nitrate	all	90
Nickel sulfate	all	90
Nitric acid	5	70
Nitric acid	20	50
Oleic acid	all	90
benzoyl benzonic acid	all	90
Oxalic acid	all	90

P

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Perchloric acid	10	40
Phenol	100	NR
Phosphoric acid	5	100
Phthalic acid	all	90
Picric acid	20	NR
Pottassium bicarbonate	10	70
Pottassium bichromate	all	90
Pottassium carbonate	10	70
	25	60
	50	60
Pottassium chloride	all	90
Pottassium hydroxide	10	65
	25	65
	30	65
Pottassium nitrate	all	90
Pottassium permangante	all	90
Pottassium persulate	all	90
Pottassium sulfate	all	90

S

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
chlorine water	saturated	80
Silver nitrate	all	90
Sodium bicarbonate	10	80
Sodium bicarbonate	saturated	80
Sodium bisulfate	saturated	80
Sodium hydroxide	10	70
	25	70
	30	70
	35	70
Sodium chlorate	10	60
Sodium chloride	saturated	90
Sodium hydrogen phosphate	10	90
Sodium hydroxide[1,2]	5	70
	10	70
	25	70
	50	70
Sodium hypochlorite[1,2,3]	15	60
Sodium nitrate	all	90
Sodium sulfate	all	90
Sodium sulride	all	90
Stearic acid	all	90
Stearic acid	all	90
Sulfanilic acid	all	90
Sulfuric acid[4]	25	80
	50	80
	60	80
	70	80

T, Z

Chemical	Concentration (%)	Max. Recommended Temperature (°C)
Tannic acid	all	90
Tartaric acid	all	90
Tobias acid	all	90
Zinc sulfate	all	90

HomeProducts

product

EMC NH-860 Overview

Resonac Corporation is one of the top providers of Epoxy Molding Compound (EMC) for semiconductor industry, with more than 30 years’ experience. In Malaysia, we have 2 manufacturing sites and 1 R&D facility to support our local as well as world-wide customers. With the growing Automotive industry, semiconductor packaging has become increasingly challenging with requirement to meet AEC-Q100 Grade0 MSL1 standard and beyond. Resonac Corporation is developing new EMC to meet this challenge – NH-860 series. It is designed with low modulus and high adhesion strength to prevent delamination, and thus improving package reliability. NH-860 series meets good MSL and package reability performance with non-roughened QFN package.

In addition, NH-860 series enables semiconductor package leadframe to switch from roughened to non-roughened surface. Thus, it has good potential for overall package cost down.

Join us in this journey towards AEC-Q100 and beyond.

Performance

Through internal evaluation, NH-860K2 can meet good MSL performance for QFN and SOP packages as shown in table below.

Note: all leadframes are non-roughened.
Note: NH-860K2 is improvement from NH-860 which is the initial development item.

By using NH-860K2, it enables package cost reduction by changing leadframe (or lead-frame) from roughened to non-roughened surface.

NH-860 has low modulus and high adhesion properties to prevent delamination.

Properties	Unit	Mass Production EMC1	NH-860K2
Tg	°C	102	100
Specific Gravity	–	2.00	1.99
CTE, α1	ppm/°C	10	9
CTE, α2	ppm/°C	31	34
Flexural Modulus (Room Temp.)	GN/m²	28	27
Flexural Modulus (260°C)	MN/m²	530	290
Ag adhesion (Room Temp.)	MPa	7.9	8.4
Ag adhesion (260°C with soaking)	MPa	0.4	0.3
PDF adhesion (Room Temp.)	MPa	6.2	8.9
PDF adhesion (260°C with soaking)	MPa	0.1	0.4

Refer to table above, NH-860K2 has lower modulus and higher adhesion strength to prevent delamination.

NH-860K2 Passed MSL1 with Zero Delamination

Non-roughened PPF QFN package

Non-roughened ring-AgCu QFN package

PKG size : 10 x 10mm
Die pad size : 6.4 x 6.4mm
Die size : 3 x 3 x 0.37mm

NH-860K2 Passed Continuous Molding 600 Shots

Achieve CTI 600V based on internal evaluation (based on IEC60112)

CTI Test
Drop Volume	0.997 – 1.147g for 50 drops
Drop height	35 ± 5mm
Electrolyte	Ammonium chloride solution (0.1±0.02%)
Drop interval	30±5s
Short-circuit criterion	>0.5A for 2s
EMC Thickness	3mm

Insulating Material Group	CTI
I	600 ≤ CTI	NH-860K2
II	400 ≤ CTI < 600
IIIa	175 ≤ CTI < 400 (FR4)
IIIb	100 ≤ CTI < 175

Achieve AEC-Q100 Grade 0 Requirement

(1) NH-860K2 pass TC 2000 cycles (-55°C to 150°C) on non-roughened PPF SO-28L leadframe.

(2) NH-860K2 pass HTSL 2000 hours (175°C) on non-roughened PPF SO-28L leadframe.

(3) NH-860K2 pass b-HAST 192 hours (130°C/85%RH/5V) on non-roughened PPF SO-28L leadframe.

Datasheet

For more information, kindly refer to Datasheet below.

Kindly click the following links below to start your download.

NH-860K2 properties

HomeProducts

product

Apprecier™ & Ascomate-C™ Vitamin C Derivative Overview

Our Vitamin C derivatives are active ingredients for your skincare. We have 2 kind of Vitamin C derivatives which named Apprecier™ (APPS), providing high effectiveness on anti-aging at low dosage. Apprecier significantly reduces melanin production in reconstructed human skin model, with oil and water solubility. And, “Ascomate-C™” (APM) is good for brightening and anti-acne at affordable price.

Both of them have difference characteristics and benefits from different chemical formulas. However, we do guarantee on the stability of product quality and effectiveness. Free sample is available, so please feel free to drop us your enquiry.

Product Details

Apprecier™ (APPS) Premium Vitamin C derivative

Apprecier is a stabilized provitamin C formed from L-ascorbyl 2-phosphate (aqueous Vitamin C) and L-ascorbyl 6-palmitate (oil soluble Vitamin C), an amphipathic compound. L-ascorbyl 2-phosphate is a strong scavenger of free radicals and is capable of promoting collagen synthesis in the skin, effective for anti-aging. L-ascorbyl 6-palmitate is a fat-soluble form of vitamin C, and is capable of getting into the lipid domains of biological systems. It can protect cell membranes and Low Density Lipoproteins (LDL) against oxidation. Apprecier™ is easily soluble in water and forms an emulsion, which helps its infiltration into the dermis through the epidermis.

Download PDF – Technical Information

Ascomate-C™ (APM)

Ascomate-C™ or Ascorbyl Phosphate Magnesium (magnesium L-ascorbyl 2-phosphate, APM) is stable vitamin C (ascorbic acid, AsA) derivatives. APM have mainly been utilized as an active ingredient of whitening cosmetics. Recent investigations show us various possibilities to utilize them as multi functioning, stable “provitamin C”. Intradermal and Ectodermal protective effects against UV-generated radicals suggest these materials would be suitable for UV-care products as well. APM is stable under atmospheric conditions, safe and effective quenchers of intradermal reactive oxygen species, physiologically more effective than native vitamin C, capable of improving various skin problems.

Download PDF – Technical Information

For more details on our skincare products, please download the catalog.

We do provide details of technical data for many formulas such as collagen, anti-acne, whitening, please feel free to drop us your interest.

Apprecier™ and Ascomate-C™ Formulation Reference

Apprecier™ (APPS) Formulation

Kindly select on one of the following links below for more information

Download PDF – Serum

Download PDF – Cream

Ascomate-C™ (APM) Formulation

Kindly select on one of the following links below for more information

Download PDF – Lotion

Download PDF – Gel

Download PDF – Cream

Free samples are available, so please feel free to drop us your interest here.

HomeProducts

product

Molecular Sieve Overview

Molecular sieve is moisture adsorbent with high strength, heat resistance and various shapes and sizes to answer numerous applications. It is also known as synthetic zeolite.

We are expanding many new applications in drying, refining and separation processes in industries such as oil refining and petrochemical. Resonac group (formerly Showa Denko) has been manufacturing and selling molecular sieves for more than 50 years, and providing excellent products to a wide range of industries.

Based on our own technology, we do provide proposal and consultation about the selection of adsorbents, the most suitable grade. Also, we could give suggestion regarding the design of adsorption facilities.

Applications

Refrigerator and Air Conditioner

Drying of refrigerant

Housing

Double glazing window (air drying)
Dehumidifier (air drying)
Curtains and carpets (materials deodorization)

Healthcare

Molecular sieve for PSA O2/Oxygen generator (separation of N2 / O2 in air). PSA type cycle for high purity Oxygen.
Packaging material for medicines and test agents (air drying, materials deodorization )

Automotive

Air conditioner (drying of refrigerant)
Air brake (air drying )
Lithium battery electrolyte (drying / purification of materials)

Convenience store

Bento container (removal of resin odor）
Water Treatment
Purifier (removal of pollutants)

Oil refinery

Reformer (removal of chlorine compounds)
LPG purification for aerosols
LPG refining equipment (removal of sulfur compounds, etc.)

Air plant

Raw material air refining equipment (air water / CO2 removal)

Factories

Exhaust gas purification device (removal of VOCs in exhaust gas)

Power plant

Electric barrier (drying of insulating gas)
Wastewater treatment equipment (removal of radioactive substances in contaminated water)

Grades

We offers high-quality molecular sieve products, from basic grades to specialized products to meet your needs.

Molecular Sieve (3A, 4A, 5A, 13X)

Grades:	3A, 4A, 5A, 13X , and more special grades can be proposed.
Description:	We have various grades of molecular sieve. With our original development and technology, they are loved by customers in various industries all over the world.
Applications:	Oxygen concentrator for respiratory patient Dehydration of air in compressed air brake systems in trucks, buses. Moisture removal for curing process control in polymer paints, epoxies and urethanes Refrigerant dehydration in automotive and refrigerator Dehydration in packaging / containers for products such as pharmaceuticals, test kits, vitamins, foods, candy, machine parts, films, and instruments Removal of impurity in Air separation plant / Natural gas plant / Chemical plant
Benefits:	High reliability with international standard Global brand with customers around the world Competitive price High flexibility to be used with any facilities or branded systems Free consultation via email / Whatsapp or on-site visit

Download PDF for Product type, grade, shape, size, and packaging information.

USKK Adsorbent Shape and Size

Bead	Pellet	Trisiv^TM	Powder

Diameter = 4×8, 8×12, etc * *4×8 = 4 ～ 8Mesh （Mesh; ASTM Standard）	Diameter = 1.6 or 3.2mm (1/16 or 1/8inch)	Diameter = 3.2 or 6.4mm (1/8 or 1/4 inch)	Mean particle size: 10μm or less
Spherical Often used for small devices, such as automotive parts.	Cylindrical Often used in petroleum refining and chemical industry plants.	Cloverleaf cross section Often used in chemical plants. Excellent in balance between dynamic adsorption capability and pressure drop.	White powder Often added to resins to dry resins or provide additional characteristics (e.g., to produce hygroscopic packing materials.)

Ethos™ for Bio-ethanol Industry

Description:	Showa Denko group has developed new molecular sieve for dehydration process in Bioethanol industry named ETHOS™, which is specially designed to suit for Ethanol production process. ETHOS™ provides great heat resistance and high crush strength, still bold performance on moisture adsorption
Application:	Zeolite for dehydration in ethanol purification process
Benefits:	Increase productivity by its heat shock resistance and high crush strength Non-sensitive to heat and movement Long lifetime Competitive price

Download PDF – ETHOS™ Specification

APG Series for Gas Processing

Description:	Molecular Sieve specialized in gas processing.
Application:	Natural gas dehydration Natural gas impurities removal >> Mercury/Sulfur/CO2 Removal of Olefin compound in LPG
Customer Benefits:	Customized selection High product quality with worldwide record Good customer services such as on-site visit with local support and – providing analysis of current absorbent

Download PDF – LPG flyer

HomeProducts

product

Shodex™ HPLC Column Overview

Shodex™ HPLC columns specialized in high-quality & long lifetime polymer-based columns. Shodex™ manufactured by Resonac (formerly Showa Denko K.K.) in Japan since 1965, which leads us to having great knowledge, experience and a comprehensive application database for HPLC column.

Resonac Asia Pacific Pte. Ltd. is responsible for the South Asia, South East Asia and Oceania regions. We offer profound technical support and have a strong partnership with customers and distributors in different countries.

Catalog and Manuals Download

Liquid chromatography (LC) uses liquid as mobile phase (eluent). It is an analytical method that separates a mixture of compounds based on their physical and chemical differences. High performance liquid chromatography (HPLC) is a method that introduces the mobile phase under high-pressure conditions resulting in rapid and high-performance separations. The various interactions between the analyte, stationary phase (packing material) and mobile phase are the key factors for the separation. A wide variety of separation modes can be achieved by using particular combinations of stationary and mobile phases.

Shodex™ provides both of Silica-based and Polymer-based HPLC columns. we have wide ranges of application, knowledge and experience to support your analysis e.g. Reversed-phase, Sugar, Polymers, Pullulan/Polystyrene standards for calibration, Environment analysis and etc.

Kindly select on one of the following links below to start your download.

Download PDF – Shodex™ Catalog 2023
Download PDF – Trouble Shooting Guide

Visit our YouTube channel: SHODEX Singapore for more helpful videos.

Understand Reversed-phase Chromatography and Shodex Polymer-based HPLC column

Understand HILIC mode in HPLC

Shodex™ Operation Manuals

Shodex™ HPLC Columns Operation Manuals PDF Download

Asahipak ODP Series (Reversed Phase):

SB Polyhydroxymethacrylate GFC Series:

- LB-800
- SB-800/SB-2000
- SB-2000 series
- SB-807 HQ

PROTEIN KW GFC Series:

- KW-800 Series
- KW-402
- KW-403
- KW-404
- KW-405
- LW-403
- LW-803

GPC Series:

- HK Rapid Series
  - HK-404L
  - HK-G

Amino HILIC Series:

- VT-50 2D
- VG-50 2D
- VG-50 4D and 4E
- VN-50
- VC-50
- NH2P-40 E-Series
- NH2P-50 Series

Ion Chromatography:

- SI-90 4E
- SI-52 4E
- SI-50 4E
- IC YS-50

Ion Exchange:

- (coming soon)

SUGAR Series:

- General SUGAR Columns (SC, SH, SP, SZ)
- KS-800 Series

Multimode & Multi-solvent:

- Asahipak GF/GS HQ Series Operation Manual

Reversed Phase Polymer:

- DE-413/DE-613/DE-213
- DS and DM Series

Silica Series:

- General Silica Series

Specialized Chromatography (Affinity/HIC/Cleanup/Chiral/Surfactant Removal):

- CDBS-453

Shodex™ USP-NF Column List

List Shodex™ corresponding columns to United States Pharmacopeia (USP) and the National Formulary (NF). Please use it as a reference for the best columns required for your USP method development. Contact us for alternative columns that may not be listed here.

No.	Packing material	Recommended column
L1	Octadecyl silane chemically bonded to porous or nonporous silica or ceramic microparticles, 1.5 to 10 μm in diameter, or a monolithic rod.	Silica C18M C18U
L17	Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the hydrogen form, 6 to 12 μm in diameter.	SUGAR SH1011 SUGAR SH1821 RSpak KC-811
L19	Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the calcium form, 5-15 μm in diameter.	SUGAR SC1011 SUGAR SC1211 EP SC1011-7F USPpak MN-431
L20	Dihydroxypropane groups chemically bonded to porous silica or hybrid particles, 1.5-10 μm in diameter, or a monolithic silica rod.	PROTEIN KW-800 series KW400 series PROTEIN LW-803 PROTEIN LW-403 4D
L21	A rigid, spherical styrenedivinylbenzene copolymer, 3 to 30 μm in diameter.	GPC KF-800, KD-800, KF-400HQ, HK-400, LF, RSpak DS-613 RSpak DS-413
L22	A cation-exchange resin made of porous polystyrene gel with sulfonic acid groups, 5-15 μm in diameter.	CXpak P-421S SUGAR SP0810 SUGAR SC1011 SUGAR KS-800 series SUGAR SC1211 SUGAR SZ5532 EP SC1011-7F USPpak MN-431 RSpak DC-613 SUGAR SH1011 SUGAR SH1821 RSpak KC-811
L23	An anion-exchange resin made of porous polymethacrylate or polyacrylate gel with quartenary ammonium groups, 7-12 μm in size.	IEC QA-825 IC I-524A
L25	Packing having the capacity to separate compounds with a molecular weight range from 100-5000 (as determined by polyethylene oxide), applied to neutral, anionic, and cationic water-soluble polymers. A polymethacrylate resin base, cross-linked with polyhydroxylated ether (surface contained some residual carboxyl functional groups) was found suitable.	OHpak SB-802 HQ OHpak SB-802.5 HQ OHpak LB-802.5
L33	Packing having the capacity to separate dextrans by molecular size over a range of 4,000 to 500,000 Da. It is spherical, silica-based, and processed to provide pH stability.	PROTEIN KW-800 series KW400 series PROTEIN LW-803 PROTEIN LW-403 4D
L34	Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the lead form, 7 to 9 μm in diameter.	SUGAR SP0810
L37	Packing having the capacity to separate proteins by molecular size over a range of 2,000 to 40,000 Da. It is a polymethacrylate gel.	OHpak SB-803 HQ OHpak LB-803
L38	A methacrylate-based size-exclusion packing for water-soluble samples.	OHpak SB-800 HQ series OHpak LB-800 series
L39	A hydrophilic polyhydroxymethacrylate gel of totally porous spherical resin.	ODP2 HP RSpak DM-614 OHpak SB-800 HQ series OHpak LB-800 series
L45	Beta cyclodextrin, R,S-hydroxypropyl ether derivative, bonded to porous silica particles, 3-10 μm in diameter.	ORpak CDBS-453
L58	Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form, about 6 to 30 μm in diameter.	CXpak P-421S SUGAR KS-800 series RSpak DC-613
L59	Packing for the size-exclusion separations of proteins (separation by molecular weight) over the range of 5 to 7000 kDa. The packing is a spherical 1.5- to 10-μm, silica or hybrid packing with a hydrophilic coating.	PROTEIN KW-800 series KW400 series PROTEIN LW-803 PROTEIN LW-403 4D
L67	Porous vinyl alcohol copolymer with a C18 alkyl group attached to the hydroxyl group of the polymer, 2 to 10 μm in diameter.	Asahipak ODP-50
L71	A rigid, spherical polymetacrylate, 4 to 6 μm in diameter.	RSpak DE-613 RSpak DE-413 RSpak DE-213
L76	Silica based, weak cation-exchange material, 5 μm in diameter. Substrate is surface polymerized polybutadiene-maleic acid to provide carboxylic acid functionalities. Capacity not less than 29 μEq/column.	IC YK-421
L82	Polyamine chemically bonded to cross-linked polyvinyl alcohol polymer, 5 μm in diameter.	Asahipak NH2P-50
L89	Packing having the capacity to separate compounds with a molecular weight range from 100 to 3000 (as determined by polyethylene oxide), applied to neutral and anionic water-soluble polymers. A polymethacrylate resin base, cross-linked with polyhydroxylate ether (surface contains some residual cationic functional groups).	OHpak SB-802.5 HQ OHpak LB-802.5

Distributors

We offer keen technical support and have a strong partnership with customers and distributors in different countries. We do provide free consultation for your HPLC analysis.
Please feel free to drop us your HPLC columns enquiry or contact local distributors below:

India

Spark Scientific Private Ltd (Inkarp Instruments Pvt Ltd subsidiary)
https://www.sparksci.in/

Thailand

Bara Scientific Co., Ltd.
http://www.barascientific.com

Sithiporn Associates Co.,Ltd.
http://www.sithiphorn.com

Siam General Equipment Co.,Ltd.
http://www.sge-science.com

Applied Chemicals and Instrument Co. Ltd.
http://www.acisciences.com/

Indonesia

* Please contact us directly for information of distribution channel

Malaysia

Analisa Resources (M) Sdn Bhd.
http://www.analisa-scientific.com/

Vietnam

* Please contact us directly for information of distribution channel

Singapore

Scientific Resources Pte Ltd.
http://www.analisa-scientific.com/

Philippines

* Please contact us directly for information of distribution channel

Myanmar

EverSeiko Co., Ltd.
https://www.everseikocorp.com/

product

SHOROX™

SHOROX™ Overview

Applications

Specification

Contact Us

Product Enquiry

product

LED Chip

LED Chip Overview

Applications

Catalog and Specification

Catalogue Download

Data Sheet – MOCVD LED

Contact Us

Product Enquiry

product

Viscomate™

Viscomate™ Overview

Product Grades

Comparison of VISCOMATE™ Grade

Formulation Reference

Application

Information

Contact Us

Product Enquiry

product

TPNa™ Vitamin E Derivative

TPNa™ Vitamin E Derivative Overview

TPNa™ Details

TPNa™ Features

Significant Increase of Skin Moisturization

Active Ingredient for Quasi Drug in Japan

Anti-oxidation & Anti-aging Effect

TPNa™ Formulation Reference

Contact Us

Product Enquiry

product

RIPOXY™ Vinyl Ester Resin

RIPOXY™ Overview

Product List

Bisphenol-A Epoxy Vinyl Ester Resin

Novolac Epoxy Vinyl Ester Resin

Brominated Epoxy Vinyl Ester Resin

Epoxy Vinyl Ester Resin Primer

Epoxy Vinyl Ester Flake Compound

Unsaturated Polyester Resin

Application Fields

Distributors

Singapore

Indonesia

Vietnam

Thailand

Philippines

Taiwan

UAE

Turkiye

Pakistan

Contact Us

Product Enquiry

product

SH Series Vinyl Ester Resin

SH Series Overview

Product List

Chemical Corrosion Resistance Table

A

B

C

D~E

F~G

H~K

L~M

N~O

P

S

T, Z

Contact Us

Product Enquiry

product

Epoxy Molding Compound (EMC) NH-860